Library EM All-in-one deactivator & activator

Library EM All-in-one workstation 

Characteristics

● Flexible operation--The optional automatic and manual modes can meet all operation requirements.

● Excellent performance--The effective height of activation and deactivation is as high as 9 cm. One operation can activate / deactivate multiple books at the same time.

● Perfect function--It can activate, deactivate and detect magnetic stripe. The device can detect whether there is magnetic stripe in the book, whether the magnetic stripe can be deactivated or whether the permanent magnetic stripe and magnetic stripe have magnetism.

● Reliable operation—In terms of the effective operation space or execution speed, the device can ensure reliable activation, deactivation and magnetic detection.

● Good compatibility--The device can operate on all types of magnetic stripe at present, including those from different companies (such as 3M, Checkpoint Meto, Tagit, etc.), those with different amorphous materials (such as harmonic wave and Barkhausen effect) and those from different countries (such as China, Germany, Czech Republic, Israel, Russia, etc.).

● Low power consumption--The device only works when books pass or when a message from a barcode scanner or computer is received. In standby mode, the power of the device is only 100mV. It not only saves energy, but also minimizes electromagnetic pollution.

Technical specifications

Control unit and interfaces

1)Power interface: used to connect 220 V or 110 V AC power supply.

2)Main switch button: used to turn on and off the device.

3)RS-232 serial port: reserved interface.

4)Auxiliary switch: turn on and off the device when embedded in the installation

Fuse Replacement

The fuse is placed in the power socket of the control host and includes a spare fuse.

1. Turn off the power of the control host.

2. Insert a suitable flat screwdriver into the slot on the fuse holder and pull out the holder outwards.

3. Replace the current fuse with a spare fuse or a fuse with the same specification (250 VAC @ 4 A，Φ5 x 20 mm), and then plug the card holder back into the power socket.

Installation

Place the console directly on a surface level and able to bear its weight, or embedded into the plane.

Basic operation

Magnetic check

1. Select Check mode.

2. According to the section of "operation specification (page 10)", put the books to be checked on the console correctly.

One of the four lights is on.

Notes and Tips

For accuracy, it is recommended to put only one book at a time.

Activation and deactivation

1. Select Normal mode.

2. Select Auto mode; or, select Manual mode, and then select Activation or Deactivation.

3. Correctly place the books to be activated / deactivated on the console as described in the section < operation specification (page 10) >One of the four lights is on.

Notes and Tips

If you want to achieve activation / deactivation of several books at the same time, all the magnetic strips in them should be deactivatable; otherwise, some magnetic strips may not be activated or deactivated correctly.

Technical specifications

Hot Tags: Library EM All-in-one deactivator & activator, China, suppliers, manufacturers, cheap, quotation, for sale, EM Handheld Detector EM Tester